Panel Mount Industrial LCD Monitors
CyberVisuell Panel Mount series industrial LCD monitors combine a smart front bezel with a rugged and long-lasting metal housing, for mounting into a panel or wall.
The range is available in many sizes from 5.7″ up to 65″, either with 4:3 aspect or widescreen.
The monitors are built using a fully metal chassis, and stainless steel front panel versions are also available.
The Panel Mount series offers an unmatched array of monitor options, so monitors can easily be custom configured to meet individual customer requirements. For example:
The factory can supply monitors with custom combinations of options, even for very small orders, due to the highly modular design.
Panel Mount LCD Monitors (optionally with IP65 Front)
Aluminium or Stainless Steel Bezel
CyberVisuell Panel Mount Industrial LCD monitors are designed for mounting into a panel or wall. They combine a rugged all-metal housing with a smart front bezel, making it easy to fit into most industrial or commercial environments.
The front bezel can be made of aluminium or stainless steel, and can optionally be sealed to IP65. The OSD buttons can be either on the side panel to prevent tampering, or on the front panel for easy access.
These monitors are available with rear screw mounting, in which holes must be drilled in the panel and screws installed from the rear; or rear clamp mounting, in which small clamps are attached from the back and screwed tight against the panel (see Options table below for details).
Sizes and Resolutions
4:3 Screen Models |
Wide Screen Models |
||
Model No Size Resolution |
Pics of 5.7″ and 20.1″ |
Model No Size Resolution |
Pics of 7″ and 42″ |
PMx0576VN 5.7″ 640x480PMx0656VN 6.5″ 640x480PMx0846SN 8.4″ 800x600PMx0975XN 9.7″ 1024×768
|
PMx0706WV 7″ 800x480PMx1016WS 10.1″ 1024x600PMx12W5WE 12.1″ 1280x800PMx1545WE 15.4″ 1280×800PMx17W5WP 17″ 1440×900
PMx19W5WP 19″ 1440×900
PMx2155WH 21.5″ 1920×1080
PMx2205WM 22″ 1680×1050
PMx2405WH 24″ 1920×1080
PMx2415WU 24″ 1920×1200
PMx3025WQ 30″ 2560×1600
PMx3205WH 32″ 1920×1080
PMx4204WH 42″ 1920×1080 |
Common Specifications
Display Type |
TFT LCD | |
Panel |
Surface | Black Anti-Glare, Low Reflection Coating |
Light Source | CCFL, (old-cathode fluorescent lamps) Long Life 50,000 Hrs (typ) Optional LED Backlight available |
|
Inputs |
VGA Input | 15-pin D-Sub Female, Analog RGB Signal |
0.7/1.0Vp-p, 75 Ohms, Fh = 30-82kHz, Fv = 50-75Hz | ||
Separate Sync / Composite Sync / Sync on Green | ||
Audio | Stereo Mini Jack, 2W Speaker x2 | |
Power |
15″ models and above | AC mains 90-260V auto sensing input |
Up to 12″ / option on 15″-22″ | 12V DC, with External AC Adaptor included | |
Mounting |
Screw or clamp mount into panel – according to size. VESA mount on rear – hole patterns: |
Up to 17″: 75 x 75 mm |
19″-24″: 100 x 100 mm | ||
26″-37″: 400 x 200 mm | ||
Features |
Auto Calibration, Back Light Adjustment, Plug & Play (VESA DDC/CI, DDC 2B) | |
Operating Conditions |
Temperature / Humidity | 0°C to 50°C, 10%-90% (non condensing) |
Storage Conditions |
Temperature / Humidity | -20°C to 60°C, 10%-90% (non condensing) |
Certifications |
CE, FCC, C-Tick | CE, FCC, C-Tick |
Options
Most options may be ordered in any quantity of monitorsPlease note some combinations of options/sizes may not be possible – please contact us for a quote. |
Option Codes |
|
Grades |
Marine Grade – shock and vibration tolerant, anti-rust For marine applications we recommend using FME Marine Front Panel Mount series (see below), wide range DC input, sunlight readable, and wide dimming range options. |
-GM |
Vehicle Grade – shock and vibration tolerant For vehicle applications we also recommend using the wide range DC input, and sunlight readable option. Wide Dimming Range may also be required. |
-GV | |
Panel / Backlight |
LED Backlight (brightness specified in nits xxxx) For Sunlight Readable: Use 1000 or 0700 nits high brightness models |
-BLxxxx |
CCFL Backlight (brightness specified in nits xxxx) | -BCxxxx | |
Wide Dimming Range, controlled by OSD buttons | -BW | |
Wide Dimming Range, controlled by knob | -BK | |
TouchscreensUSB connection by default, or specify -RS232 for serial Infomation about Touchscreens |
Resistive | -TR |
Capacitive (cannot detect gloved finger), optionally with 6mm Anti-Vandal Glass | -TC or -TC6 | |
SAW (Surface Acoustic Wave) | -TS | |
Infra-Red | -TI | |
Projected Capacitive (can sense a passive stylus or gloved fingers) with 6mm Anti-Vandal Glass | -TP6 | |
Protective Glass (no touch): 3mm, or 6mm Anti-Vandal | -TG3 or -TG6 | |
Inputs |
VGA | -IV |
VGA + DVI | -IVD | |
VGA + DVI + HDMI | -IVDH | |
VGA + DVI + HDMI + RS-232 remote control input | -IVDHR | |
VGA + S-Video + Composite Video (BNC connectors) | -IVSC | |
VGA + S-Video + Composite Video with Looping Output(BNC connectors) | -IVSCL | |
VGA + DVI + S-Video + Composite Video | -IVDSC | |
VGA + HDMI + Composite Video with Looping Output | -IVHCL | |
VGA + HDMI | -IVH | |
VGA + Media Player (plays various formats from CF / SD cards / USB stick) | -IVM | |
Power |
AC mains 90-260V auto sensing input (only for 15″ and larger) | -P240 |
12V DC, with External AC Adaptor included | -P12 | |
Wide voltage range DC power input | -PW | |
Mounting method |
Rear Screw Mount Screws not supplied – screw length must be equal to panel width plus 4mm. Holes must be drilled into the panel, in appropriate locations (drawings available). |
(default, no code) |
Rear Clamp Mount Clamps and screws supplied for easy mounting into a panel without screw holes – max panel thickness 12mm (monitors up to 24″) or 20mm (monitors above 24″) |
-MC | |
Other |
Wide Temperature Range | -RW |
Wide Viewing Angle | -VW | |
Light Sensor with auto dimming | -LS | |
OSD buttons on a wired Remote Control box | -OR | |
Integrated PC (Panel PC / Digital Signage Platform) Options include Fanless Atom N270, Atom D525, Core 2 Duo, Core 2 Quad, Core i5, Core i7 |
Contact us |
Marine Front Panel Mount LCD Monitors with Custom Options
CyberVisuell’s Marine Front Panel Mount LCD monitors are designed for use on ships and boats. Their smart aluminium front bezels are rated to IP65 with protective glass over the screen, and the rear housing is rated to IP54 and protected with an anti-rust powder coating on the steel casing. The chassis are internally strengthened against shock and vibration, and they include a wide tolerance DC power supply input, as well as providing a wide dimming range for night use.
The screw holes go through the front of the bezel, making it easy to mount the monitor into a console without needing access behind to secure the mounting.
A similar version called Marine Tilt Mount is available with an innovative adjustable tilt stand, allowing these monitors to be mounted either from the roof, wall or or on an operator desk.
The OSD controls are on the front panel for easy access to dim the screen when needed.
Sizes and Resolutions
Common Specifications
Display Type |
TFT LCD | |
Panel |
Surface | Black Anti-Glare, Low Reflection Coating |
Light Source | CCFL, (old-cathode fluorescent lamps) Long Life 50,000 Hrs (typ) Optional LED Backlight available |
|
Inputs |
VGA Input specs (other inputs available) |
15-pin D-Sub Female, Analog RGB Signal |
0.7/1.0Vp-p, 75 Ohms, Fh = 30-82kHz, Fv = 50-75Hz | ||
Separate Sync / Composite Sync / Sync on Green | ||
Audio | Stereo Mini Jack, 2W Speaker x2 | |
Power |
Power input | 9-36 VDC wide range DC input |
Mounting |
Screw mount into panel; VESA mount on rear – hole patterns: |
Up to 17″: 75 x 75 mm |
19″-20″: 100 x 100 mm | ||
Features |
Auto Calibration, Back Light Adjustment, Plug & Play (VESA DDC/CI, DDC 2B) | |
Operating Conditions |
Temperature / Humidity | 0°C to 50°C, 10%-90% (non condensing) |
Storage Conditions |
Temperature / Humidity | -20°C to 60°C, 10%-90% (non condensing) |
Certifications |
CE, FCC, C-Tick | CE, FCC, C-Tick |
Options
Most options may be ordered in any quantity of monitorsPlease note some combinations of options/sizes may not be possible – please contact us for a quote. |
Option Codes |
|
Grades |
Marine Grade – shock and vibration tolerant, anti-rust For marine applications we also recommend using wide range DC input, sunlight readable LED backlit, and wide dimming range options. |
-GM |
Panel / Backlight |
LED Backlight (brightness specified in nits xxxx) For Sunlight Readable, use 1000 or 0700 nits |
-BLxxxx |
CCFL Backlight (brightness specified in nits xxxx) | -BCxxxx | |
Wide Dimming Range, controlled by OSD buttons | -BW | |
Wide Dimming Range, controlled by knob | -BK | |
TouchscreensUSB connection by default, or specify -RS232 for serial Infomation about Touchscreens |
Resistive | -TR |
Capacitive (cannot detect gloved finger), optionally with 6mm Anti-Vandal Glass | -TC or -TC6 | |
SAW (Surface Acoustic Wave) | -TS | |
Infra-Red | -TI | |
Projected Capacitive (can sense a passive stylus or gloved fingers) with 6mm Anti-Vandal Glass | -TP6 | |
Protective Glass (no touch): 3mm, or 6mm Anti-Vandal | -TG3 or -TG6 | |
Inputs |
VGA | -IV |
VGA + DVI | -IVD | |
VGA + DVI + HDMI | -IVDH | |
VGA + DVI + HDMI + RS-232 remote control input | -IVDHR | |
VGA + S-Video + Composite Video (BNC connectors) | -IVSC | |
VGA + S-Video + Composite Video with Looping (BNC connectors) | -IVSCL | |
VGA + DVI + S-Video + Composite Video | -IVDSC | |
VGA + HDMI + Composite Video with Looping | -IVHCL | |
VGA + HDMI | -IVH | |
VGA + Media Player (plays various formats from CF / SD cards / USB stick) | -IVM | |
Power |
Wide voltage range DC power input | -PW |
Mounting Brackets |
Supplied without mounting brackets | -MN |
Includes marine style multi-tilt mounting brackets | -MB | |
Other |
Wide Temperature Range | -RW |
Wide Viewing Angle | -VW | |
Light Sensor with auto dimming | -LS | |
OSD buttons on a wired Remote Control box | -OR | |
Integrated PC (Panel PC / Digital Signage Platform) Options include Fanless Atom N270, Atom D525, Core 2 Duo, Core 2 Quad, Core i5, Core i7 |
Contact us |
Contact Information
Europe
+43 7 2090 204
Australia
+61 2 9481 7420
India
+91 84079 14077
email hidden; JavaScript is required